Flexo Printing Machine

Edale FL5

Suitable for cartons packaging

Custom Bullet Points
  • Material range (micron): 12 – 700 microns | 0.5 – 27pt
  • Web widths (mm) (inch): 600mm | 23.6”
  • Repeat range (mm) (inch): 254 – 711.2mm | 10 – 28″
  • Mechanical speed (m/min) (ft/min): 200 m/min | 660 ft/min
Custom Bullet Points

FDC

  • Impressions: Up to 13,000 per hour
  • Web widths (mm) (inch): 600mm | 23.6”
  • Maximum cut length (mm) (inch): 711.2mm | 28″
  • Maximum cut width (mm) (inch): 600mm | 23.6”
  • Height of cutting blades (mm) (inch): 23.8mm | 0.94”
  • Maximum cutting force: 165 tons
  • Maximum diverging card delivery: 4 across

Edale FL3

Suitable for labels, film & foil, light packaging carton, specialty packaging

Custom Bullet Points
  • Material range (micron): 12 – 450 microns | 0.5 – 18pt
  • Web widths (mm) (inch): 430mm | 16.9”
  • Repeat range (mm) (inch): 203.2 – 609.6mm | 8 – 24″
  • Mechanical speed (m/min) (ft/min): 200 m/min | 660 ft/min

Edale FL1

Suitable for labels

Custom Bullet Points
  • Material range (micron): 12 – 350 microns | 0.5 – 14pt
  • Web widths (mm) (inch): 350mm | 13.7”
  • Repeat range (mm) (inch): 203.2 – 609.6mm | 8 – 24″
  • Mechanical speed (m/min) (ft/min): 200 m/min | 660 ft/min

Offset Inline Machine

Codimag Viva 420

Unwinder/Rewinder

Custom Bullet Points
  • Maximum roll size : 1000mm diameter / 350 kg

Aniflo Printing Units

Custom Bullet Points
  • Minimum printing length : 200 mm / 7,87”
  • Maximum printing length : 432 mm / 17”
  • Minimum web width : 120 mm / 4,72”
  • Maximum web width : 420 mm / 16,54”
  • Maximum print width : 420 mm / 16,54”

Codimag Viva 340

Unwinder/Rewinder

Custom Bullet Points
  • Maximum roll size : 1000mm diameter / 350 kg

Aniflo Printing Units

Custom Bullet Points
  • Minimum printing length : 50 mm / 1,97”
  • Maximum printing length : 305 mm / 12”
  • Minimum web width : 120 mm / 4,72”
  • Maximum web width : 340 mm / 13,39”
  • Maximum print width : 340 mm / 13,39

Codimag Viva 340 Evolution

Unwinder/Rewinder

Custom Bullet Points
  • Maximum roll size : 1000mm diameter / 350 kg

Aniflo Printing Units

Custom Bullet Points
  • Minimum printing length : 50 mm / 1,97”
  • Maximum printing length : 305 mm / 12”
  • Minimum web width : 120 mm / 4,72”
  • Maximum web width : 340 mm / 13,39”
  • Maximum print width : 340 mm / 13,39

Print Results

Finishing & Converting Machine

Smag ICONNECT C RFID/NFC Converting Line

Custom Bullet Points
  • Minimum web width: 40 mm
  • Maximum web width: Available in 3 width models (Also available in MAX version 350 mm) : 180 mm, 200 mm, 250 mm
  • Maximum width of inlays and label inserted, depending on the application head chosen: 160 mm or 240 mm
  • Maximum speed (depending on the inlays and label formats) and insertion head option: 80 m/min or 150 m/min
  • Length registration accuracy for tag application: +/- 1mm
  • Side registration accuracy for tag application: +/- 0.5mm
  • Minimum distance between two inlays (depending on chip and label formats): Minimum 15 mm
  • Maximum unwinder diameter: 450 mm (Standard) and 600 mm (Optional)
  • Maximum rewinder diameter: 450 mm
  • Standard core diameter but other sizes available: 76 mm

Allows to:

Custom Bullet Points
  • Insert a UHF / HF NFC / anti-theft RFID chip between an adhesive label and its carrier backing
  • Place a label on top of another label for promotional coupons or creative effects
  • Place a label of a different shape or material next to another label (wine market)

Smag ICONNECT E RFID/NFC ENCODING & Controlling Line

Custom Bullet Points
  • Minimum width: 40 mm
  • Maximum web width (Available in 2 width models): 200 and 250 mm wide
  • Maximum encoding and control speed (depending on RFID tag format): 60 m/min
  • Maximum unwinder diameter: 450 mm (Standard) and 600 mm (Optional)
  • Maximum rewinder diameter: 450 mm
  • Standard core diameter but other sizes available: 76 mm

Allows to:

Custom Bullet Points
  • Control the printing quality and position of the inlay under the label with an 100% 4K inspection camera
  • Check RFID inlay quality (UHF and HF)
  • Print a data matrix code or any other variable data from a database
  • Encode the RFID inlay (UHF and HF) from a database
  • Encode the RFID inlay from variable data printed and read on-line
  • Control the final encoding process, mark defective tags, destroy defective inlays, stop defective tags on a splicing table

Smag ICONCEPT

Custom Bullet Points
  • Minimum / maximum web width: 2 versions (350 mm and 450 mm)
  • Minimum / maximum web thickness: for 2 versions (350 mm and 450 mm) | 30/250 microns
  • Standard unwind/rewind reel diameters (other diameters optional): 350 mm and 450 mm | 2 shafts (800 mm and 500 mm)

Custom Bullet Points
  • Flexo plate cylinder repeat: for the 2 versions 350 mm and 450 mm, 400mm
  • Laminating and cold foil stamping unwind/rewind diameters: for the 2 versions 350 mm and 450 mm, 400mm
  • Maximum screen-printing format (width x repeat): for the 2 versions 350 mm (340 x 340 mm) and 450 mm (440 x 440 mm)
  • Maximum format for semi-rotary foil station (width x repeat): 350 mm version only, 330 x 230 mm
  • Maximum format for flatbed foil and embossing station (width x repeat): 350 mm version only, 330 x 330 mm (max. 40% of surface)
  • Stamping, embossing and flatbed die-cutting module pressure: 350 mm version only, 50 tons

Custom Bullet Points
  • Rotary or semi-rotary die-cylinder development: for both 350 mm and 450 mm versions, from 12″ to 25.5″
  • Maximum waste reel diameter: for the 2 versions 350 mm and 450 mm, 650mm
  • Maximum flexo speed in rotary mode (mechanical or servo with automatic registration control) *: for the 2 versions 350 mm and 450 mm, up to 150 m/min
  • Maximum flexo speed in semi-rotary servo registered mode *. for the 2 versions 350 mm and 450 mm, up to 60 m/min
  • Maximum flat-bed foil speed type HGV *: 350 mm version only, up to 45 m/min
  • Maximum flat embossing speed type EGV *: 350 mm version only, up to 50 m/min
  • Maximum flat screen-printing speed SP * for the 2 versions 350 mm and 450 mm, up to 25 m/min

Custom Bullet Points
  • Maximum die cutting speed in mechanical rotary mode *. for the 2 versions 350 mm and 450 mm, up to 200 m/min
  • Maximum die cutting speed in registered servo-rotary mode *: for the 2 versions 350 mm and 450 mm, up to 150 m/min
  • Maximum die cutting speed in registered semi-rotary servo mode *. for the 2 versions 350 mm and 450 mm, up to 70 m/min
  • Maximum flatbed die cutting speed DGV * : 350 mm version only, up to 50 m/min
  • Variable-format sheet output: minimum/maximum format: for 2 versions 350 mm and 450 mm, from 100 mm to 500 mm
  • Registration accuracy for all modules : for the 2 versions 350 mm and 450 mm, +/- 0,125mm

Smag ICONTROL

Custom Bullet Points
  • Minimum / maximum width: 3 versions: 100 / 350 mm or 450 mm or 530 mm
  • Minimum / maximum substrate thickness: 30/250 microns
  • Standards unwind/rewind diameters: 800 /500 mm (2 shafts)(other diameters optional)
  • Splice detection system: Option *
  • Splice detection system: Standard
  • BST Nyquist, EL or other control systems: Option *
  • Variable data printing with Inkjet process: Option *
  • Maximum mechanical operating speed* : 300 m/min
  • Slitting with counter-knives, razor blades, pressure knives: Available according to modules
  • Automatic positioning of knives : Option *

*Speed according substrate and camera performances

Smag Iconvertlite

Dedicated to labels die cutting and finishing, Iconvertlite is the ideal compact solution for pre-printed labels

Can receive as option: web treatment systems, full varnish module, laminating or cold foil system

Custom Bullet Points
  • Minimum / maximum web width: 100 / 350 mm
  • Minimum / maximum web thickness: 30 / 250 microns
  • Standard unwind diameter/Standard diameter rewinder (others as option): 800 / 450 mm (1 shaft and 2 as option)
  • Corona treatment: option *

Custom Bullet Points
  • Flex printing cylinder sizes available: From 12″ to 24″ available
  • Varnishing cylinder stop in the gap between two labels: Standard
  • Standard laminating / cold foil unwind diameter: 400 mm
  • Die cutting cylinder sizes available in rotary or semi rotary mode: From 12″ to 25.5″ available

Custom Bullet Points
  • Waste roll maximum diameter: 650 mm
  • Maximum speed flexo full rotary (mechanical) * : 150m/min
  • Maximum speed flexo full rotary mode serve (with automatic registration) * : 120m/min
  • Maximum speed semi-rotary die cutting mode up to (according to ratio between the plate length and cylinder repeat) * : 70m/min

Custom Bullet Points
  • Maximum speed full rotary die cutting (mechanical) * : 200m/min
  • Maximum speed full rotary die cutting servo (with automatic registration) * : 150m/min
  • Pressure gauge for rotary/semi rotary die station : Standard
  • UV/LED drying option: Standard UV
  • Slitting process: Razor blades
  • Registration accuracy off all modules: +/- 0.125mm

Other Specifications:

Custom Bullet Points
  • Gap die adjustment for rotary/semi rotary die station option
  • Quality control module with camera such BST Nyquist, AVT or others option
  • Variable data printing with inkjet technology option
  • Hot air / IR drying option

*production speed depending on processes, formats, weeding, substrates, inks

en_USEnglish
id_IDIndonesian en_USEnglish